Polymer Nation F-80 Fast Speed 83% Solids Pigmented Polyaspartic

$1.00

Polymer Nation F-81 is primarily used as a fast setting base or topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.

SKU: N/A Categories: ,

Description

F-80 combines our fast pigmented polyaspartic with our proprietary Iso blend to create a fast speed, pigmented polyaspartic. F-80 is a 83% solids, low viscosity polyaspartic that provides the skilled installer with a short working time- fast dry time material that will allow for multiple steps to be completed in one day. With great opacity it is easy to create a solid looking finish with as little as 6 mils WFT.

Description Results Notes
Kit Yield in Gallons 3, 15, 165 Special packaging is available based on size of order and time constraints
Number of Components 2
Mix Ratio Liquids by Volume 2:1 It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures 70F-80F 40-60% RH
Mixed Viscosity in cP@25C/77F 600-700 Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time N/A Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch .5-1 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry 1.25-2 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk 2.5 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use 12 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure 7 Days Warmer temperatures will reduce time and colder temperatures will increase time
Pendulum Hardness (König) at 24 hrs. 20 Warmer temperatures will increase hardness
Pendulum Hardness (König) at 7 days 50 Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle 90+
VOC’s of Mixed Material <50g/L EPA Method 24
Color Scale per ASTM D1500 N/A
Solids by Volume Mixed 91%
Storage 60F-90F Store material between 60-90 degrees F in a protected dry location.
Odor Very Subtle
Application Thickness in Mils As a floor topcoat 6-12. As a wall topcoat 4-6.
Disposal Dispose of  material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors White, Light Gray, Warm Sun
Mixing & Installation Combine all of part A and B into a single container, large enough to accept the entire kit. Mix at 350 RPM for 2-3 minutes using an appropriate mixing blade and making sure not to introduce excessive air into the solution. Pour the entire content from the container onto the floor and follow normal squeegee and back roll or cut and roller techniques. Recoat within 24 hours. Clean tools with a solvent similar to Xylene or Acetone.

Additional information

F-80 Packaging

3 Gallon Kit, 15 Gallon Kit

Color

White C-18, Light Gray C-03, Warm Sun C-16

Viscosity

Low, Medium