Polymer Nation F-61 Slow Speed 83% Solids Clear Polyaspartic

Polymer Nation F-61 is primarily used as a clear topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass

SKU: N/A Category: Tag:

Description

Polymer Nation F-61 combines a proprietary blend of polyol with Iso to create an intermediate speed, clear polyaspartic. F-61 is an 83% solids, low viscosity polyaspartic that provides easy application with a moderate dry time.  It will not yellow or chalk over time and provides a great, high gloss finish with as little as 6 mils WFT.

Description Results Notes
Kit Yield in Gallons 3, 15, 165 Special packaging is available based on size of order and time constraints
Number of Components 2
Mix Ratio Liquids by Volume 1:1 It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures 70F-80F 40-60% RH
Mixed Viscosity in cP@25C/77F 250-350 Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time N/A Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch 4-5 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry 10-12 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk 14 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use 16 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure 7 Days Warmer temperatures will reduce time and colder temperatures will increase time
Pendulum Hardness (König) at 24 hrs. 18 Warmer temperatures will increase hardness
Pendulum Hardness (König) at 7 days 50 Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle 90+
VOC’s of Mixed Material <50g/L EPA Method 24
Color Scale per ASTM D1500 N/A
Solids by Volume Mixed 80%
Storage 60F-90F Store material between 60-90 degrees F in a protected dry location.
Odor Very Subtle
Application Thickness in Mils As a floor topcoat 6-12. As a wall topcoat 4-6.
Disposal Dispose of  material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors Clear and Color Packs
Mixing & Installation Combine all of part A and B into a single container, large enough to accept the entire kit. Mix at 350 RPM for 2-3 minutes using an appropriate mixing blade and making sure not to introduce excessive air into the solution. Pour the entire content from the container onto the floor and follow normal squeegee and back roll or cut and roller techniques. Recoat within 24 hours. Clean tools with a solvent similar to Xylene or Acetone.
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.

Additional information

F-61 Packaging

3 Gallon Kit, 15 Gallon Kit

Viscosity

Low, Medium