Description
Polymer Nation F-81 combines our fast polyaspartic with our proprietary Iso blend to create a fast speed, clear polyaspartic. F-81 is a 83% solids, low viscosity polyaspartic that provides the skilled installer with a short working time- fast dry time material that will allow for multiple steps to be completed in one day.
| Description | Results | Notes |
| Kit Yield in Gallons | 2, 10, 100 | Special packaging is available based on size of order and time constraints |
| Number of Components | 2 | |
| Mix Ratio Liquids by Volume | 1:1 | It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures |
| Ideal Application Temperatures | 70F-80F 40-60% RH | |
| Mixed Viscosity in cP@25C/77F | 570 | Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity |
| Gel Time | N/A | Warmer temperatures will decrease gel time and lower temperatures will increase gel time |
| Dry to Touch | 1 hours | Warmer temperatures will reduce time and colder temperatures will increase time |
| Through Dry | 2.5 Hours | Warmer temperatures will reduce time and colder temperatures will increase time |
| Dry to Walk | 5 Hours | Warmer temperatures will reduce time and colder temperatures will increase time |
| Dry to Lightly Use | 12 Hours | Warmer temperatures will reduce time and colder temperatures will increase time |
| Full Cure | 7 Days | Warmer temperatures will reduce time and colder temperatures will increase time |
| Pendulum Hardness (König) at 24 hrs. | 20 | Warmer temperatures will increase hardness |
| Pendulum Hardness (König) at 7 days | 50 | Warmer temperatures will shorten time to reach full hardness |
| Gloss @ 60 Degree Angle | 85-95 | |
| VOC’s of Mixed Material | <50g/L | EPA Method 24 |
| Color Scale per ASTM D1500 | N/A | Clear |
| Solids by Volume Mixed | 100% | |
| Storage | 60F-90F | Store material between 60-90 degrees F in a protected dry location. |
| Odor | Very Subtle | |
| Application Thickness in Mils | As a floor topcoat 6-12. As a wall topcoat 4-6. | |
| Disposal | Dispose of material, containers, solvents, etc.per Federal, State and local guideline, rules and laws | |
| Available Colors | Clear and Safety Colors | |
| Mixing & Installation | Combine all of part A and B into a single container, large enough to accept the entire kit. Mix at 350 RPM for 2-3 minutes using an appropriate mixing blade and making sure not to introduce excessive air into the solution. Pour the entire content from the container onto the floor and follow normal squeegee and back roll or cut and roller techniques. Recoat within 24 hours. Clean tools with a solvent similar to Xylene or Acetone. | |
| Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only. |
||
