Polymer Nation SP-17 Rapid Patch 100% Solids Polyaspartic

Polymer Nation SP-17 is most often used to patch concrete holes, cracks, divots and non-moving joints when time is too limited for the SP-15 patching material.

SKU: N/A Categories: , ,

Description

Polymer Nation SP-17 combines our fastest setting polyaspartic with our proprietary Iso blend to create a rapid pour and patch system. By incorporating a variety of fillers and aggregates the user can achieve a patching material that is ready for grinding in 1 hour.

Description Results Notes
Number of mixes per kit Depends on mix size A 1 mix kit consists of 1 part A, 1 part B and select aggregate or powder. See Mixing and Installation below.
Number of Components 2
Mix Ratio by Volume 2:1 see Mixing & Installation
Ideal Application Temperatures 50F-80F
Mixed Viscosity in cP@25C/77F 300 A & B Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time 5 min. Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch .5 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry .75 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk 2 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use 3 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure 2 Days Warmer temperatures will reduce time and colder temperatures will increase time
Shore Hardness at 24 hours D65 Warmer temperatures will increase hardness
Shore Hardness at 7 days D81 Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle 30-40 Applying material close to dew point will decrease gloss and may result in an amine blush
VOC’s of Mixed Material <50g/L EPA Method 24
Color Scale per ASTM D1500 .5-1.0 Clear to slightly amber before filler is introduced
Solids by Volume Mixed 100%
Storage 60F-90F Store material between 60-90 degrees F in a protected dry location.
Odor Subtle
Coverage Per Mix N/A
Disposal Dispose of  material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors This material is available in clear
Mixing & Installation This material is extremely fast reacting. Only mix what can be poured out in 3-4 minutes from initial mixing. A starting point mixture may consist of 2 FL. OZ. A, 2 FL. OZ. B and 245 grams of aggregate (about 5 FL. OZ.). Aggregate size and the fluidity of the mixed material is based upon user preference and application parameters. Combine 1 part A and 1 part B into a single container, large enough to accept the entire kit. Mix liquids at 200 RPM for 30 seconds using an appropriate mixing blade. Immediately add the aggregate into the mixed resin and agitate for 1 minute. Immediately pour the entire mixed content from the container into the area to be filled. Patch may be shaved in 30 min. to 1 hr. and ground after 2 hours. Clean tools with a solvent similar to Xylene or Acetone.
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.

 

Additional information

SP-17 Packaging

2 Gallon Kit, 10 Gallon Kit