Polymer Nation SP-41 Clear 100% Solids Flexible Polyaspartic

SP-41 is primarily used as a clear topcoat over EPDM, due to its unsurpassed UV, flexibility and abrasion resistance. It can also be used as a component in flexible wall systems and padding. It adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.

SKU: N/A Categories: ,

Description

SP-41 combines our robust, clear polyaspartic resin with our proprietary Iso blend to create a flexible, polyaspartic with uncanny performance characteristics. SP-41 is a 100% solids, low viscosity polyaspartic that provides amazing working time, abrasion and UV resistance.

Description Results Notes
Kit Yield in Gallons 2, 10, 100 Special packaging is available based on size of order and time constraints
Number of Components 2
Mix Ratio Liquids by Volume 1:1 It is always preferred to mix the entire kit, whenever possible, to avoid off-ratio mixtures
Ideal Application Temperatures 70F-80F 40-60% RH Verify that substrate temperature is above 5 degrees of dewpoint during application and cure of material to avoid a potential amine blush
Mixed Viscosity in cP@25C/77F 500-600 Warmer temperatures will reduce viscosity and lower temperatures will increase viscosity
Gel Time N/A Warmer temperatures will decrease gel time and lower temperatures will increase gel time
Dry to Touch 4 hours Warmer temperatures will reduce time and colder temperatures will increase time
Through Dry 11 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Walk 16 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Dry to Lightly Use 18 Hours Warmer temperatures will reduce time and colder temperatures will increase time
Full Cure 7 Days Warmer temperatures will reduce time and colder temperatures will increase time
Pendulum Hardness (König) at 24 hrs. 12 Warmer temperatures will increase hardness
Pendulum Hardness (König) at 7 days 50 Warmer temperatures will shorten time to reach full hardness
Gloss @ 60 Degree Angle 90+
VOC’s of Mixed Material <50g/L EPA Method 24
Color Scale per ASTM D1500 N/A
Solids by Volume Mixed 92.5%
Storage 60F-90F Store material between 60-90 degrees F in a protected dry location.
Odor Very Subtle
Application Thickness in Mils As a floor topcoat 6-12. As a wall topcoat 4-6.
Disposal Dispose of  material, containers, solvents, etc.per Federal, State and local guideline, rules and laws
Available Colors Clear and Color Packs
Mixing & Installation Combine all of part A and B into a single container, large enough to accept the entire kit. Mix at 350 RPM for 2-3 minutes using an appropriate mixing blade and making sure not to introduce excessive air into the solution. Pour the entire content from the container onto the floor and follow normal squeegee and back roll or cut and roller techniques. Recoat within 24 hours. Clean tools with a solvent similar to Xylene or Acetone.
Polymer Nation believes the information contained herein to be true and accurate. Information contained herein is for evaluation purposes only.

Additional information

SP-41 Packaging

2 Gallon Kit, 10 Gallon Kit